|
 The high frequency generators Series HFG 8-12 are applicable for metal heating, treatment, welding, curing, bonding, brazing and soldering with using of inductors (induction heaters) specialized for that purpose.
The induction heating and welding of metals uses lower consumption of power, than conventional methods, it can be applicable for each platform and it is faster than the classic methods of heating/welding.
HFG 8-12 Technical Parameters
| |
High Frequency Generators - Series HFG 8-12 (12kW) |
| |
Parameter |
Value |
| 1 |
Supply voltage |
3 x 230 / 400 V ± 10% |
| 2 |
Nominal frequency of the mains |
50 / 60 / Hz ± 2% |
| 3 |
Consumed power |
max. 12,8 kVA |
| 4 |
HF power at the generator’s output:
Consumed power at the oscillator's input: |
max. 11,8 kW
max. 12,6 kW |
| 5 |
Working frequency:
Nominal frequency: |
250 kHz to 350 kHz
300kHz |
| 6 |
Protection degree of generator |
IP44 |
|
7 |
Working mode: |
continuous |
|
8 |
Welding time:
(can be adjusted and depends from the material) |
1s ÷ 100s |
|
9
|
Cooling water:
- flow rate
- pressure
- temperature |
10 l/min
0,4 ÷ 0,5 MPa
15 ÷ 18 °C |
| 10 |
Dimensions
(without welding modules/inductors): |
700 x 500 x 200 mm |
| 11 |
Net weight
(without welding modules/inductors): |
29 kg. |
   Each different detail for welding/ heating requires to be designed different type modules and induction heaters. On the photos are shown examples only.
It is possible for heat treatment of smaller details to be used generators with lower power consumption for more effectiveness. |
Service 1
